TE

Home Sprinkler Irrigation System Latched Sprinkler Fittings TE
Sprinkler Irrigation System
TE

SPECIFICATIONS

It is used to distribute the line by multiplying it in different directions.

TE
Ürün Kodu Çap - Diameter
Product Code mm
3115.050.1050 50/50
3115.063.1050 63/50
3115.063.1063 63/63
3115.075.1075 75/75
3115.090.1075 90/75
3115.090.1090 90/90
3115.110.1050 110/50
3115.110.1063 110/63
3115.110.1075 110/75
3115.110.1090 110/90
3115.110.1110 110/110
3115.125.1050 125/50
3115.125.1063 125/63
3115.125.1075 125/75

 

Ürün Kodu Çap - Diameter
Product Code mm
3115.125.1090 125/90
3115.125.1110 125/110
3115.125.1125 125/125
3115.140.1075 140/75
3115.140.1090 140/90
3115.140.1110 140/110
3115.140.1125 140/125
3115.140.1140 140/140
3115.160.1075 160/75
3115.160.1090 160/90
3115.160.1110 160/110
3115.160.1125 160/125
3115.160.1140 160/140
3115.160.1160 160/160

FAQ

  • Up to how many bar pressure do Sprinkler Irrigation Pipes resist?
    • Sprinkler irrigation pipes withstand 6 atm pressure but all elements of the system may not work under this pressure. For example, the number of sprinklers used or the sprinkle flow rate can damage the sprinkler operation under this pressure. As such, sprinkler irrigation systems should be operated at 2-3 bar levels.

  • What is the difference between MDPE HDPE Pe 80 and Pe 100?
    • Polyethylenes defined with petrochemical development are classified according to their density LDPE/Low Density Polyethylene, MDPE/Medium Density Polyethylene and HDPE/High Density Polyethylene. High Density Polyethylenes have more strength than others. MRS (Minimum Required Strength) value has been calculated as 8 for MDPE and 10 for HDPE products. This allows for more fluid to pass through due to a higher strength at lower wall thickness for HDPE. MDPE products, on the other hand, provide advantages in cracks and splitting caused by external impacts with a larger wall thickness value.