Reducer

Home Sprinkler Irrigation System Clamped Sprinkler Fittings Reducer
Sprinkler Irrigation System
Reducer

SPECIFICATIONS

It is an intermediate piece that provides reduction in pipe diameter.

Reducer
Ürün Kodu Çap - Diameter
Product Code mm
3116.090.1075 90/75
3116.110.1075 110/75
3116.110.1090 110/90
3116.125.1075 125/75
3116.125.1090 125/90
3116.125.1110 125/110
3116.140.1075 140/75
3116.140.1090 140/90
3116.140.1110 140/110
3116.140.1125 140/125
3116.160.1110 160/110
3116.160.1125 160/125
3116.160.1140 160/140

FAQ

  • Up to how many bar pressure do Sprinkler Irrigation Pipes resist?
    • Sprinkler irrigation pipes withstand 6 atm pressure but all elements of the system may not work under this pressure. For example, the number of sprinklers used or the sprinkle flow rate can damage the sprinkler operation under this pressure. As such, sprinkler irrigation systems should be operated at 2-3 bar levels.

  • What is the difference between MDPE HDPE Pe 80 and Pe 100?
    • Polyethylenes defined with petrochemical development are classified according to their density LDPE/Low Density Polyethylene, MDPE/Medium Density Polyethylene and HDPE/High Density Polyethylene. High Density Polyethylenes have more strength than others. MRS (Minimum Required Strength) value has been calculated as 8 for MDPE and 10 for HDPE products. This allows for more fluid to pass through due to a higher strength at lower wall thickness for HDPE. MDPE products, on the other hand, provide advantages in cracks and splitting caused by external impacts with a larger wall thickness value.