Ø 25 Flat Drip Irrigation Pipe

Home Drip Irrigation Systems Flat Drip Pipes Ø 25 Flat Drip Irrigation Pipe
Drip Irrigation Systems
Ø 25 Flat Drip Irrigation Pipe

SPECIFICATIONS

  • 1.6, 2.2 and 2.6 flow rate
  • 12 mil is produced at Ø25 mm.
Ø 25 Flat Drip Irrigation Pipe
Çap - Dia / Ø 25 12 mil
Aralık / Spacing Rulo - Roll
mt mt
10-cm 600
15-cm 650
20-cm 750
25-cm 750
30-cm 900
40-cm 900
50-cm 900

 

Ø 25 AKPLAS YASSI DAMLA SULAMA BORULARI HAT ÇEKİM MESAFELERİ
Ø 25 AKPLAS FLAT DRIP IRRIGATION PIPE LINES SHOOTING DISTANCE
 1 atm Basınçta 1,6 lt/h
Damlatıcı Aralığı Eğitim / Slope
Distance of Dripper -2 -1 0 1 2
20-cm 253 192 170 124 95
30-cm 380 288 255 186 143
40-cm 507 384 340 248 190
60-cm 760 576 510 372 286

 

 1 atm Basınçta 2,6 lt/h
Damlatıcı Aralığı Eğitim / Slope
Distance of Dripper -2 -1 0 1 2
20-cm 146 130 113 88 72
30-cm 219 195 170 132 109
40-cm 292 260 226 177 145
60-cm 438 391 340 265 217

FAQ

  • Up to how many bar pressure do Sprinkler Irrigation Pipes resist?
    • Sprinkler irrigation pipes withstand 6 atm pressure but all elements of the system may not work under this pressure. For example, the number of sprinklers used or the sprinkle flow rate can damage the sprinkler operation under this pressure. As such, sprinkler irrigation systems should be operated at 2-3 bar levels.

  • What is the difference between MDPE HDPE Pe 80 and Pe 100?
    • Polyethylenes defined with petrochemical development are classified according to their density LDPE/Low Density Polyethylene, MDPE/Medium Density Polyethylene and HDPE/High Density Polyethylene. High Density Polyethylenes have more strength than others. MRS (Minimum Required Strength) value has been calculated as 8 for MDPE and 10 for HDPE products. This allows for more fluid to pass through due to a higher strength at lower wall thickness for HDPE. MDPE products, on the other hand, provide advantages in cracks and splitting caused by external impacts with a larger wall thickness value.