Ø 20 - 1,0 mm Akplas Round Drip Irrigation Pipe Lines 

Home Drip Irrigation Systems Round Drip Pipes Ø 20 - 1,0 mm Akplas Round Drip Irrigation Pipe Lines 
Drip Irrigation Systems
Ø 20 - 1,0 mm Akplas Round Drip Irrigation Pipe Lines 
Ø 20 - 1,0 mm (2Lt. & 4 Lt)
Ürün Kodu Aralık Rulo Uzunluğu
Product Code Spacing Roll Length
  cm mt
3510-11 020 1020 20 300
3510-11 020 1025 25 300
3510-11 020 1033 33 300
3510-11 020 1040 40 300
3510-11 020 1050 50 300
3510-11 020 1060 60 300

FAQ

  • Up to how many bar pressure do Sprinkler Irrigation Pipes resist?
    • Sprinkler irrigation pipes withstand 6 atm pressure but all elements of the system may not work under this pressure. For example, the number of sprinklers used or the sprinkle flow rate can damage the sprinkler operation under this pressure. As such, sprinkler irrigation systems should be operated at 2-3 bar levels.

  • What is the difference between MDPE HDPE Pe 80 and Pe 100?
    • Polyethylenes defined with petrochemical development are classified according to their density LDPE/Low Density Polyethylene, MDPE/Medium Density Polyethylene and HDPE/High Density Polyethylene. High Density Polyethylenes have more strength than others. MRS (Minimum Required Strength) value has been calculated as 8 for MDPE and 10 for HDPE products. This allows for more fluid to pass through due to a higher strength at lower wall thickness for HDPE. MDPE products, on the other hand, provide advantages in cracks and splitting caused by external impacts with a larger wall thickness value.