Ø 16 Flat Drip Irrigation Pipe

Home Drip Irrigation Systems Flat Drip Pipes Ø 16 Flat Drip Irrigation Pipe
Drip Irrigation Systems
Ø 16 Flat Drip Irrigation Pipe

SPECIFICATIONS

  • 1.6, 2.2 and 2.6 flow rate
  • 6 mil, 8 mil, 10 mil, 12 mil, 15 mil are produced in Ø16 mm.
Ø 16 Flat Drip Irrigation Pipe
Çap - Dia / Ø 16 6 mil 8 mil 10 mil 12 mil 15 mil
Aralık / Spacing Rulo - Roll Rulo - Roll Rulo - Roll Rulo - Roll Rulo - Roll
mt mt mt mt mt mt
10-cm 2300 1600 1000 1000 900
15-cm 2400 1700 1100 1100 1000
20-cm 2500 1800 1250 1200 1050
25-cm 2500 2000 1300 1300 1100
30-cm 3000 2000 1400 1400 1200
40-cm 3000 2100 1600 1600 1400
50-cm 3000 2200 1700 1700 1500

 

Ø 16 AKPLAS YASSI DAMLA SULAMA BORULARI HAT ÇEKİM MESAFELERİ
Ø 16 AKPLAS FLAT DRIP IRRIGATION PIPE LINES SHOOTING DISTANCE
 1 atm Basınçta 1,6 lt/h
Damlatıcı Aralığı Eğitim / Slope
Distance of Dripper -2 -1 0 1 2
20-cm 115 105 100 80 75
30-cm 160 150 140 127 95
40-cm 210 186 178 140 100
60-cm 220 193 185 153 115

 

 1 atm Basınçta 2,6 lt/h
Damlatıcı Aralığı Eğitim / Slope
Distance of Dripper -2 -1 0 1 2
20-cm 115 105 100 80 75
30-cm 160 150 140 127 95
40-cm 210 186 178 140 100
60-cm 220 193 185 153 115

FAQ

  • Up to how many bar pressure do Sprinkler Irrigation Pipes resist?
    • Sprinkler irrigation pipes withstand 6 atm pressure but all elements of the system may not work under this pressure. For example, the number of sprinklers used or the sprinkle flow rate can damage the sprinkler operation under this pressure. As such, sprinkler irrigation systems should be operated at 2-3 bar levels.

  • What is the difference between MDPE HDPE Pe 80 and Pe 100?
    • Polyethylenes defined with petrochemical development are classified according to their density LDPE/Low Density Polyethylene, MDPE/Medium Density Polyethylene and HDPE/High Density Polyethylene. High Density Polyethylenes have more strength than others. MRS (Minimum Required Strength) value has been calculated as 8 for MDPE and 10 for HDPE products. This allows for more fluid to pass through due to a higher strength at lower wall thickness for HDPE. MDPE products, on the other hand, provide advantages in cracks and splitting caused by external impacts with a larger wall thickness value.