Latch Set

Home Sprinkler Irrigation System Latched Sprinkler Fittings Latch Set
Sprinkler Irrigation System
Latch Set

SPECIFICATIONS

Latch - Pin - Spring are sold as a set.

Latch Set
Ürün Kodu Çap - Diameter
Product Code mm
MANDAL Latch
1201.001.1000 50 - 63
1201.007.1000 75
1201.002.1000 90 - 110
1201.003.1000 125 - 140 - 160
PİM Pin
1206.004.1000 50 - 63
1206.005.1000 75
1206.009.1000 90
1206.014.1000 110
1206.015.1000 125
1206.011.1000 140 - 160
YAY Spring
1205.004.1000 50 - 63
1205.001.1000 75 - 90 -110
1205.002.1000 125 - 140 -160

FAQ

  • Up to how many bar pressure do Sprinkler Irrigation Pipes resist?
    • Sprinkler irrigation pipes withstand 6 atm pressure but all elements of the system may not work under this pressure. For example, the number of sprinklers used or the sprinkle flow rate can damage the sprinkler operation under this pressure. As such, sprinkler irrigation systems should be operated at 2-3 bar levels.

  • What is the difference between MDPE HDPE Pe 80 and Pe 100?
    • Polyethylenes defined with petrochemical development are classified according to their density LDPE/Low Density Polyethylene, MDPE/Medium Density Polyethylene and HDPE/High Density Polyethylene. High Density Polyethylenes have more strength than others. MRS (Minimum Required Strength) value has been calculated as 8 for MDPE and 10 for HDPE products. This allows for more fluid to pass through due to a higher strength at lower wall thickness for HDPE. MDPE products, on the other hand, provide advantages in cracks and splitting caused by external impacts with a larger wall thickness value.